AI Music Harsh Highs FixerSmooth out piercing highs and shimmer in Suno songs, automatically

Does your Suno track sound shrill, sizzly, or metallic? Are the “s” sounds stabbing your ears?
This tool finds the high-frequency peaks that stick out and cuts only the part that sticks out. It can also reduce MP3/AAC artifacts.

Drop an audio file here

Input: MP3, WAV, AAC (M4A), FLAC, OGG, and more / Output: WAV or MP3

Free, no sign-up. Your audio is processed on your device and never uploaded.

One file at a time, up to 200 MB and 20 minutes. Audio is processed at its original sample rate.

01

How to Fix Harsh Highs in AI Music

  1. Choose an audio file

    Pick the MP3, WAV, or M4A you downloaded from Suno or another AI music generator. For lossy files like MP3 and AAC, codec artifact reduction turns on automatically.

  2. Click “Analyze & Smooth Peaks”

    The tool analyzes the highs, then decides where each peak is, how wide it is, and how much to cut. There's nothing to dial in.

  3. A/B it, set the strength, and download

    Switch between Before and After. If it feels like too much, back off the “Effect strength” slider. The sound and the spectrum update instantly. When you're happy, click “Reapply & Download WAV” or grab an MP3 (224 or 320 kbps).

02

Why Suno and Other AI Songs Sound Harsh, Shrill, or Metallic

Ever played a Suno or Udio track on earbuds, or a little loud, and noticed the cymbals and “s” sounds stabbing your ears? Maybe the highs sound grainy, swirly, or metallic, or your ears just get tired after a few minutes. Most of the time, the culprit is a resonant peak: a narrow band of high frequencies sitting a few dB above everything around it.

AI-generated audio often has thin, sustained peaks around 5–12 kHz, plus peaks that flare up on specific sounds like sibilant vocals or hi-hats. If you downloaded the song as an MP3 or other lossy file, you also get sizzly, swirly “shimmer” (codec artifacts) in the highs and a hard cutoff around 16 kHz, which makes it even more fatiguing.

A high-shelf EQ or low-pass filter can take the edge off, but it also dulls the vocals and the shine on the cymbals, leaving the mix muffled. A de-esser only handles one band, so peaks elsewhere stay put. This tool cuts only what sticks out, and only while it's sticking out, so you get rid of the harshness without losing the brightness. Think of it as a quick pre-mastering cleanup and an easy way to improve AI music audio quality.

03

What This Tool Does Under the Hood

Everything is automatic. Based on the analysis, it runs only the stages your track needs.

StageWhat it does
Automatic peak detectionSplits the song into up to 400 segments and measures the high-frequency spectrum. It looks at both what rings throughout the song (median) and what shows up on loud moments (top 10%), and flags anything 1.5 dB or more above the surrounding baseline. For each peak it sets the center frequency, width (Q), how often it occurs, and how much to cut.
Per-peak dynamic EQPuts a peaking EQ on each peak and pulls the gain down only when that frequency gets louder than its neighbors. It then re-measures the average spectrum and fine-tunes the sensitivity until each peak sits level with its surroundings (up to 3 passes).
Multiband dynamic EQWhen the highs have lots of small bumps, a short-time Fourier transform tracks each frequency against its neighbors and cuts only the excess. The median cut is added back across the range so the highs stay bright.
Loudness match and limiterMatches the processed loudness (ITU-R BS.1770) to the original and uses a look-ahead limiter to keep peaks below −1 dBFS.

If there's a bump right before a steep codec cutoff, it isn't compared against the silence above the cutoff. Instead, only that bump is brought down to the level of the band beneath it, so the area just below the cutoff doesn't sound unnaturally boosted. Nothing above the cutoff is touched, and the highs are never rolled off like a low-pass filter. If no clear peaks are found, the tool doesn't force any cuts and exports the original sound.

04

Reducing MP3/AAC Artifacts (Shimmer and Sizzle)

MP3 and AAC (M4A) shrink files by throwing away sounds that are hard to hear. At lower bitrates there isn't enough data for the highs, so tiny components flicker on and off and sound sizzly, swirly, or watery. These artifacts are sometimes called “birdies.”

When you turn on “Also reduce MP3/AAC codec artifacts,” the tool adds the following:

  • Sizzle suppression: Measures each frequency in short ~23 ms frames and compares it with the median of the surrounding ~45 ms and nearby frequencies. Only components that pop out in both time and frequency get cut. Sustained notes and broadband sounds like cymbals are left alone.
  • Mid/side detection: Stereo audio is analyzed as mid (center) and side (left-right difference). Side-channel highs, which compression tends to mangle, are treated a little more aggressively.
  • Nothing above the cutoff changes: Even if the audio is sharply cut off around 16–17 kHz, the tool doesn't roll off the highs like a low-pass filter, and everything above the cutoff stays as is.

What artifact reduction can't do

It can't bring back high frequencies that compression threw away. It also can't fully remove pre-echo (the smear right before drum hits) or the damage from very low bitrates (96 kbps and below). If the service lets you download a WAV or other uncompressed file, use that. It makes the biggest difference.

05

Checklist Before You Release AI Music on Spotify or YouTube

  • Stick with WAV when you can: Saving to MP3 again adds a bit of new artifacting to the highs you just cleaned up. WAV is the best choice for distributors like DistroKid and for video editors. If you need an MP3, go with 320 kbps.
  • Check on earbuds and speakers: Harsh highs jump out on earbuds and headphones but are easy to miss on a phone speaker.
  • Measure your loudness: Spotify, YouTube, and Apple Music turn tracks up or down to a target level on playback. Check your LUFS with the Loudness Analyzer before you upload.
  • Check the terms: Whether you can monetize or commercially release songs made with an AI music service depends on your plan and its terms of service. Always check the latest terms.
06

FAQ

Can this fix the harsh, piercing highs in my Suno songs?

If the harshness comes from specific frequencies sticking out above their neighbors (resonant peaks), yes. The tool finds them automatically and cuts only the amount that sticks out. It doesn't roll off all the highs, so your track keeps its sparkle.

How much MP3/AAC artifacting can it remove?

It tames the sizzly, swirly “shimmer” that lossy compression adds to the highs. It leaves everything above the codec's cutoff alone. It can't restore high frequencies that compression threw away, and it can't fully remove pre-echo before drum hits.

Can I download the result as an MP3?

Yes. Choose “Download MP3 (224 kbps)” or “Download MP3 (320 kbps).” Re-encoding to MP3 adds a little new artifacting to the highs, so pick 320 kbps for the best quality, or WAV if you plan to edit or distribute the track.

Will the volume change?

By default, the processed audio is matched to the original's loudness (LUFS), and a limiter keeps peaks below −1 dBFS. That way, when you A/B the two versions, you hear the change in tone, not a change in volume.

It says “No prominent peaks found.” What does that mean?

Your track doesn't have obvious spikes in the highs. Cutting anyway would only make it sound dull, so the audio is left as is. If it still sounds harsh to you, choose “3 kHz and up” in Advanced settings and try again.

How is this different from a de-esser or a low-pass filter?

A de-esser works on one band, usually vocal sibilance, and a low-pass or high-shelf EQ turns down all the highs. This tool analyzes the highs, finds every frequency that sticks out, and cuts each one only while it's sticking out, similar to a resonance suppressor plugin. To also tame harsh “s” sounds, choose “3 kHz and up” in Advanced settings.

Is my audio uploaded to a server?

No. Loading, analysis, processing, and WAV/MP3 export all happen inside your browser.

Is it free? Do I need an account?

It's completely free, with no account or software install required. Just open the page and go. Your downloaded WAV or MP3 has no watermark.

Does it work with Udio and other AI music generators?

Yes. It works with any audio file your browser can play, no matter which service made it. You can also use it to check the highs on home-recorded vocals or your own mixes.

Does it work on iPhone?

Yes, in Safari or Chrome. Playback works even when your iPhone is set to silent. Long songs may fail on phones with limited memory, so a computer is recommended for those.